Stalker Cars
Would you like to react to this message? Create an account in a few clicks or log in to continue.

Step 4: Attach transmission to engine

Go down

Step 4: Attach transmission to engine Empty Step 4: Attach transmission to engine

Post by Stalker Guru Tue May 12, 2015 2:24 pm

Step 4: Attach the engine to the transmission.  This is best done with the engine on the floor and supported by the engine hoist. Use a friend to not strain your back or injure yourself.  Now "stick" the transmission.  The input shaft of the tranny will need to go into the clutch disc, and then into the pilot bearing.  It usually takes some wiggling around but the transmission should slide in almost all the way.  If the transmission is not sitting on the alignment dowels, it is not in the pilot bearing yet.  DO NOT use the bolts to pull the transmission onto the engine unless the bellhousing is on the pins.
Stalker Guru
Stalker Guru

Posts : 139
Join date : 2015-05-02
Location : Saint Petersburg

Back to top Go down

Back to top

- Similar topics

Permissions in this forum:
You cannot reply to topics in this forum