Step 4: Pedals, Brakes, Hydraulics
Page 1 of 1
Step 4: Pedals, Brakes, Hydraulics
Pedal, Brake, hydaulics guide.
Pedals and booster install
http://stalkercars.com/Build_Videos/Pedals_Brakes/(1)pedals_brake_booster.wmv
Front Brake Caliper Install
http://stalkercars.com/Build_Videos/Pedals_Brakes/(2)Front_Brake_Calipers.wmv
Hydraulic line install
http://stalkercars.com/Build_Videos/Pedals_Brakes/(3)Brake_hydraulics.wmv
****AXR stuff****
The AXR has a 5" shorter passenger compartment. So it may be necessary to mount the pedals farther forward depending on your height. This can be accomplished in a couple ways. The bigger opstacle being the clutch pedal. You may be able to mount it standard and thread the bar in all the way to have the pedal more upright, but then it may require more throw on the pedal due to the ratio decrease. The other option is to mount the pedal through the wall. Meaning, use the forward most mount hole and put it through the lower 1 1/4" frame tube, and then use a spacer for the rear mount. For the brake and thottle pedal, you can simple cut the base down, and mount it against the lower frame tube with a single bolt.
Pedals and booster install
http://stalkercars.com/Build_Videos/Pedals_Brakes/(1)pedals_brake_booster.wmv
Front Brake Caliper Install
http://stalkercars.com/Build_Videos/Pedals_Brakes/(2)Front_Brake_Calipers.wmv
Hydraulic line install
http://stalkercars.com/Build_Videos/Pedals_Brakes/(3)Brake_hydraulics.wmv
****AXR stuff****
The AXR has a 5" shorter passenger compartment. So it may be necessary to mount the pedals farther forward depending on your height. This can be accomplished in a couple ways. The bigger opstacle being the clutch pedal. You may be able to mount it standard and thread the bar in all the way to have the pedal more upright, but then it may require more throw on the pedal due to the ratio decrease. The other option is to mount the pedal through the wall. Meaning, use the forward most mount hole and put it through the lower 1 1/4" frame tube, and then use a spacer for the rear mount. For the brake and thottle pedal, you can simple cut the base down, and mount it against the lower frame tube with a single bolt.
Similar topics
» Step 4: Pedals, Brakes, Hydraulics
» Step 4: Pedals, Brakes and Hydraulics
» Step 9: Exhaust
» Classic R #27 Build - Brake Booster, Dash, Pedals and Steering
» Step 9: Exhaust
» Step 4: Pedals, Brakes and Hydraulics
» Step 9: Exhaust
» Classic R #27 Build - Brake Booster, Dash, Pedals and Steering
» Step 9: Exhaust
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|