Stalker Cars
Would you like to react to this message? Create an account in a few clicks or log in to continue.

Build blog

2 posters

Go down

Build blog Empty Build blog

Post by vincengf Fri Apr 14, 2017 9:20 am

I should have mentioned this a long time ago but my wife has been writing a blog on my build progress. Here is the link: https://vincentstalker.wordpress.com/

The car is now running and had its maiden autocross last weekend.

vincengf

Posts : 4
Join date : 2016-10-01

Back to top Go down

Build blog Empty Re: Build blog

Post by comled Thu Apr 20, 2017 8:20 am

Great blog and a very nice build! Thanks for sharing.

I've not given a lot of thought to how to secure the control arms and related components in the suspension on my build but it is something that worried me early on in the project. When you reassemble with the new control arm, do you have any advice that you can share?

-Dave
comled
comled

Posts : 179
Join date : 2015-10-07
Location : New Hope, PA

http://comley.us

Back to top Go down

Build blog Empty Re: Build blog

Post by vincengf Thu Apr 20, 2017 10:19 pm

I installed a set screw at the top of the upright. I drilled the hole slightly into the threads on the "banjo fitting" to provide positive engagement. Then I added a bracket in mild steel that ties the a-arm through bolt to the upright. We will post a picture on the blog to show that part since I can't figure out how to attach my picture here.

vincengf

Posts : 4
Join date : 2016-10-01

Back to top Go down

Build blog Empty Re: Build blog

Post by Sponsored content


Sponsored content


Back to top Go down

Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum