3.8 accessory belt size and procedure.
2 posters
Page 1 of 1
3.8 accessory belt size and procedure.
Does anyone know know the alt/water/ps belt size? Part number would be great.
And whats the easiest way to change it, just undo the alternator? There doesnt seem to be any tension pulley.
And whats the easiest way to change it, just undo the alternator? There doesnt seem to be any tension pulley.
Stimpy- Posts : 12
Join date : 2015-06-10
Re: 3.8 accessory belt size and procedure.
Your power steering setup is unique to your car, It is going to be a one of kind belt. You need to take it off and have it measured and compared. The standard 3.8s without power steering do have tensioner. On your car, the belt is tensioned with lower part of the alternator. Loosen the top bolt, and then the lower bracket should thread in and out for tension.
Scott
Scott
Similar topics
» Classic R #27 Build - Alternator, Oil Filter Adapter and Belt Installation
» Step 1: Written Instruction guide on build procedure
» Step 1: Written Instruction guide on build procedure
» Step 1: Written Instruction Guide on Build Procedure
» Step 1: Written Instruction guide on build procedure
» Step 1: Written Instruction guide on build procedure
» Step 1: Written Instruction Guide on Build Procedure
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|