Step 3: Suspension

View previous topic View next topic Go down

Step 3: Suspension

Post by Stalker Guru on Mon Jul 20, 2015 10:03 pm

1: Front Suspension
Steering Rack
Lower A Arms
Upper A Arms
Shocks
Spindle
Steering Arm/fender stay plate
Rotor with bearings
Brake Calipers

2: Rear Suspension
Set the 4 trailing links to 12" center to center on the heims.
Insert the Axle through the rear of the car, or through the side then rotating 270' into position
Attach the 4 trailing links
Attach the panhard rod bar, use it to center the axle in the chassis
Install rear shocks
Install rear rotors and brakes using the guide. http://stalkercars.com/Build_Videos/ClassicBrunton/reardisc.docx
avatar
Stalker Guru
Admin

Posts : 139
Join date : 2015-05-02
Location : Saint Petersburg

View user profile http://stalkercars.com

Back to top Go down

View previous topic View next topic Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum